Caterpillar
2001 D6M XL
$145,000 USD + Shipping
Hours
4449
Condition
used
Location
Houston, TX
Stock ID
#BAM-0865
Secure This Equipment
Available for nationwide logistics & export.
Equipment Overview
2001 Caterpillar D6M XL High Track Dozer
This well-maintained Cat D6M XL is a solid, ready-to-work machine built for reliability and precision. It features a full cab with heat and A/C, 6-way blade, and ROPS protection for comfort and safety on the job. Equipped with a rear winch and showing only 4,449 hours, this unit has plenty of life left.
The undercarriage is in great condition, and it’s an Ex-Forest Service machine, known for careful use and regular maintenance. The high-track design delivers excellent balance and ground clearance, while the XL configurationprovides added stability and traction.
Runs strong, looks clean, and is work-ready. Perfect for land clearing, site prep, or general construction.
Engine
- Make: Caterpillar
- Model: 3116 ATAAC (Turbocharged, Aftercooled)
- Net Power: 140 HP (104 kW) @ 1,850 RPM
- Gross Power: 150 HP (112 kW)
- Cylinders: 6
- Displacement: 6.6 L (403 cu in)
Transmission
- Type: Powershift, direct drive
- Gears: 3 forward / 3 reverse
- Steering: Differential steering with single lever control
Operating Data
- Operating Weight (with cab, XL configuration): approx. 35,000 lb (15,875 kg)
- Fuel Capacity: 90 gal (341 L)
- Cooling System: 8.5 gal (32 L)
- Hydraulic Fluid Capacity: 17 gal (64 L)
Dimensions
- Overall Length with Blade: 15.2 ft (4.63 m)
- Width over Tracks: 8.2 ft (2.5 m) with 22-inch shoes
- Height to Top of Cab: 9.7 ft (2.96 m)
- Ground Clearance: 1.2 ft (0.36 m)
- Track Gauge: 6.25 ft (1.9 m)
Blade
- Type: VPAT (6-way Power Angle Tilt)
- Blade Width: 10.5 ft (3.2 m)
- Blade Height: 3.6 ft (1.1 m)
- Blade Capacity: 3.3 cubic yards (2.5 cubic meters)
Performance
- Forward Speed: 6.4 mph (10.3 km/h)
- Reverse Speed: 7.9 mph (12.7 km/h)
- Drawbar Pull: 52,000 lb (231 kN)
Undercarriage
- Track Shoe Width: 22 in (standard XL)
- Track Length on Ground: 8.5 ft (2.6 m)
- Ground Pressure: 6.7 psi (XL configuration)
Cab and Controls
- Full cab with heat and A/C
- ROPS/FOPS certified
- Single joystick for blade and steering control
Additional Equipment
- Rear winch
- Work lights
- Heavy-duty drawbar
This well-maintained Cat D6M XL is a solid, ready-to-work machine built for reliability and precision. It features a full cab with heat and A/C, 6-way blade, and ROPS protection for comfort and safety on the job. Equipped with a rear winch and showing only 4,449 hours, this unit has plenty of life left.
The undercarriage is in great condition, and it’s an Ex-Forest Service machine, known for careful use and regular maintenance. The high-track design delivers excellent balance and ground clearance, while the XL configurationprovides added stability and traction.
Runs strong, looks clean, and is work-ready. Perfect for land clearing, site prep, or general construction.
Engine
- Make: Caterpillar
- Model: 3116 ATAAC (Turbocharged, Aftercooled)
- Net Power: 140 HP (104 kW) @ 1,850 RPM
- Gross Power: 150 HP (112 kW)
- Cylinders: 6
- Displacement: 6.6 L (403 cu in)
Transmission
- Type: Powershift, direct drive
- Gears: 3 forward / 3 reverse
- Steering: Differential steering with single lever control
Operating Data
- Operating Weight (with cab, XL configuration): approx. 35,000 lb (15,875 kg)
- Fuel Capacity: 90 gal (341 L)
- Cooling System: 8.5 gal (32 L)
- Hydraulic Fluid Capacity: 17 gal (64 L)
Dimensions
- Overall Length with Blade: 15.2 ft (4.63 m)
- Width over Tracks: 8.2 ft (2.5 m) with 22-inch shoes
- Height to Top of Cab: 9.7 ft (2.96 m)
- Ground Clearance: 1.2 ft (0.36 m)
- Track Gauge: 6.25 ft (1.9 m)
Blade
- Type: VPAT (6-way Power Angle Tilt)
- Blade Width: 10.5 ft (3.2 m)
- Blade Height: 3.6 ft (1.1 m)
- Blade Capacity: 3.3 cubic yards (2.5 cubic meters)
Performance
- Forward Speed: 6.4 mph (10.3 km/h)
- Reverse Speed: 7.9 mph (12.7 km/h)
- Drawbar Pull: 52,000 lb (231 kN)
Undercarriage
- Track Shoe Width: 22 in (standard XL)
- Track Length on Ground: 8.5 ft (2.6 m)
- Ground Pressure: 6.7 psi (XL configuration)
Cab and Controls
- Full cab with heat and A/C
- ROPS/FOPS certified
- Single joystick for blade and steering control
Additional Equipment
- Rear winch
- Work lights
- Heavy-duty drawbar